Shanghai Bochuang Electric Co., Ltd
BOA smart camera is a highly integrated visual detection system, the application software is completely set in the camera, BOA SPOT is a low cost BOA camera, positioning, counting, measuring multiple tools to achieve detection applications. BOA SPOT smart cameras provide different levels of vision solutions to meet a wide range of application needs. Features: High resolution global shutter CMOS sensor; System integrated light source, lens and processor; M12 or C-port lens; Embedded application software; Easy-to-use interface; FTP image transmission; Remote monitoring; The cost is low; Standard M12 cable.
Shenzhen Sunshine Vision Technology Co., Ltd
Application: machine vision, professional image acquisition, image processing, medical imaging, quality inspection, factory automation, high-definition security monitoring, pattern recognition, scientific research, life science, microscope system, astronomical exploration. Agent of domestic and foreign first-class image acquisition card, industrial cameras, industrial lenses, industrial light source and image software, the main brands are Germany ImagingSource (Yingmeiking), SVS- Vistek, Canada MATROX, Japan Ricoh (Pentax), Moritex, etc.
Dongguan Aopte Automation Technology Co., Ltd
All the application solutions presented are in dynamic form, and combined with its own brand SCI products for on-site display, which has attracted the attention of many customers. The line laser scheme mainly uses the camera lens to clearly image the connector. The line laser illuminates the PIN PIN with a low Angle, so that the uniformity of the PIN PIN throughout the connector is consistent and the vertex profile of the PIN PIN is highlighted. The structural light source scheme detects the three-dimensional information of the circular arc workpiece. The stripe light source obtained by technical processing is inclined illumination and projected to the workpiece surface through the lens. Using triangulation method, the texture of the workpiece surface is analyzed, and the 3D information of the product is obtained.
Shenzhen Canrui Technology Co., Ltd
Main products on display: full-frame bilateral remote lens/line scan lens: optical magnification from 1X to 0.16X, field of view from 36 to 270MM can be covered, the maximum can support 29 million pixel industrial camera (35MM), lens interface can support F port and M58 port; 1-inch bilateral telecentric lens: Designed for 1-inch industrial camera, all adopt telecentric design, with high telecentric degree, and the field of view can be covered from 16-381mm; 4/3 "bilateral far lens: magnification 0.059, object side field of view 389.8mm, image side field of view 23MM, working distance 700MM, depth of field 332MM; 2/3-inch bilateral telecentric lens: The field of view can be covered from 17.5 to 150MM, and can support up to 2/3-inch camera.
Shenzhen Chuangke Automation Control Technology Co., Ltd
CKVisionBuilder software is a general machine vision software developed by Shenzhen Creative Automation Control Technology Co., Ltd. This software simplifies the complexity of machine vision system, reduces the technical requirements of developers, and does not need to write any code. A complex machine vision inspection project can be completed simply by combining various tools, which shortens the development cycle, improves the progress and efficiency of the project, and helps global manufacturers speed up technological transformation and upgrading capabilities. Easy-to-use machine vision system development platform: inspection tools; You don't have to write code; Visual project development can be completed in minutes; In a short time can learn to operate through training; With conditional branch, cycle, judgment, sub-process instructions, can complete complex procedures; Powerful function, advanced algorithm; Support secondary development, can be embedded in the user program.
Shenzhen Bi-Sonic Technology Co. Ltd
Bi-Like Technology as the sole partner of IDS in China, its USB 3 Multi-Camera Demo multi-camera task processing attracted a lot of attention at VisionChina Shenzhen 2016. This Demo uses 16 different IDS USB3.0 industrial cameras and runs on just one PC. Not only is it easy to build, but its line length can extend up to 50 meters, and it can run steadily without losing any frames. "Ensenso 3D Stereo Camera" based on 3D stereo vision is realized for robot sorting. Adaptive Vision Software, an intuitive, powerful and applicable machine Vision software tool and library; "Optotune Liquid Lens" with a maximum focus of 1.5 milliseconds and billions of quick focuses; The easy-to-use and powerful "Pixoel Smart Camera" and other products were on display at the show.
Dongguan Sanmusen Photoelectric Technology Co., Ltd
It focuses on its current focus on the field of automation detection technology in the back production process CNC mobile phone case full-size detection, and introduces the CNC mobile phone case, mobile phone side keys, fingerprint keys, Cato and other peripheral small parts size and appearance detection solutions. Intelligent dispersive confocal spectroscopy technology, introduces the detection principle of dispersive confocal laser and the vision + laser solution for the detection of glass surface flatness and radian for the integration of machine vision automatic detection system. Curved glass 3D contour measurement technology, using 3D reverse engineering technology to detect curved surface products (such as curved metal, curved glass, curved ceramic, etc.); Solve the measurement problem that laser triangulation method cannot solve; Suitable for harsh environment (high temperature, high pressure, irradiation); Large selection of measurement ranges.
POMEAS
In this exhibition, a series of self-developed and designed zoom lens series, telecentric lens series, industrial lens series, CCD micrometer and machine vision solutions were exhibited. And the most prominent highlight is: the latest development of the F port telecentric lens application program, with a large field of vision, zero Angle error, high resolution, high depth of field, can be used for high-precision large workpiece measurement, positioning. The second highlight is the display of high-precision CCD micrometer, used to measure the outer diameter, thickness and other parameters of objects with contour, such as: metal cylinder. With the advantages of high precision, high speed and long service life, the high precision CCD micrometer can eliminate human error compared with the traditional measurement method.
Changxin Sheng (Wuhan) Technology Co., Ltd
AOC active cable adopts the self-developed high-speed photoelectric transceiver single chip solution, through the advanced COB technology into the photoelectric module, coupled with the parent company YAFC world's leading bending fiber optic cable, complete the industry leading AOC active cable finished product manufacturing. The products mainly include SFP+ active cable series, USB3.0 active cable series, HDMI active cable series, 1394B active cable series and so on, which are widely used in data center, cloud computing system, machine vision, distance education, security monitoring, medical treatment, home theater and so on. Based on the principle of independent research and development and continuous innovation, Changxin will increase the speed of high-speed photoelectric chip from 10G to 40G-100G; USB3.0 active cable upgraded to USB3.1 active cable; HDMI active cable upgrade from HDMI 1.4 to HDMI 2.0; The product range will add VR active cable, DVI active cable, DP active cable and so on.
Dongguan Letv
Multi-angle line light source, ultra-thin side back light source, plane dome light source, tunnel line light source, new version of line light source, parallel light source, AOI light source, multi-angle ring light source... The most worthy of your attention is the latest research and development of multi-angle line light source: the use of a variety of low Angle to high Angle line light respectively combined, in a specific working distance irradiation of ultra-high Angle, features: high brightness, good anti-reflection. The light is concentrated and the linear light band is uniform. The brightness of the line light can be adjusted independently according to actual needs. Application: detection of mobile phone glass surface scratches, stains, bubbles, oil surface, watermark and other defects.
Opto Engineering
This time, with the new telepentric lens CORE series, 5X continuous macro zoom lens MZMT series with electric control, and the prime lens ENMT series with electric focus and aperture control, we participated in the "Vision China (Shenzhen) International Machine Vision Exhibition and Seminar on Machine Vision Technology and Industrial Application hosted by China Society of Image and Graphics. The harvest was very good. Opto Engineering is a technology-leading machine vision optics company and one of the most innovative and fastest growing companies in this market. Our culture is responsive to real market needs and a commitment to quality products. That's why Opto Engineering Telecenter is!
Shanghai Fangcheng Optoelectronic Technology Co., Ltd
Four series of industrial cameras: ID series, cost-effective USB2.0 industrial cameras; IU series, high performance CCD industrial cameras; IK series, 1394A interface industrial camera; IR series, miniaturized Gigabit network interface CMOS industrial camera. Latest Products: Gloabershutter Industrial Camera, Gloabershutter Industrial Camera, Gloabershutter Industrial Camera.
Guangzhou Long Walk Photoelectric Technology Co., Ltd
Long Footpath Optics focuses on the research, development and production of industrial lenses. Combined with the application requirements of machine vision system, Long Footpath Optics has developed a series of line scanning lenses with complete magnification, telecentric lenses and FA prime lenses with complete focal segment. These products with high resolution, small distortion, high quality, can adapt to all kinds of testing environment, for example, can according to user requirements for product is used to identify the authenticity of size, shape, color and so on, can also monitor and eliminate the production line NG products, labels, digital speed control, electronic components in the high speed line testing appearance defects and size, And intelligent traffic monitoring and so on.
Xiamen MMC Electronic Information Technology Co., Ltd
It is mainly committed to providing customers with complete image detection solutions and services for the control and final inspection of products in the manufacturing process, helping customers to eliminate errors in the production process, eliminate defective products from the factory, improve production efficiency, reduce manufacturing costs, control and ultimately improve product quality. At present, it has a rich product system, independent research and development, production and sales in one of the intelligent camera MIC6000 series, MICROVISION vision system, IMX-700 mold monitor and many years of vision equipment solutions experience and excellent technical strength, can meet the needs of different industries, different levels of application; The Shenzhen vision exhibition on-site demonstration of products from performance indicators, stability and so on are very suitable for visual project application, further promote the machine vision research and industrial field practical close combination.
Shenzhen Jingshirui Electronic Technology Co., Ltd
To research and development, sales and import and export business as one of the scientific and technological innovation enterprises. Products on display in this exhibition include Toshiba Teli camera, U. Tron lens, label barcode detection system, etc. We are the agent of TELI camera, U.TRON lens, Datalogic intelligent camera/code reader, independently developed 3D measurement and detection system, LCD detection system, high reflective printing appearance detection system and a series of visual detection systems. At the same time, according to the different needs of customers, combined with many years of application experience in the visual industry, to provide different performance, different prices of application solutions.
Beijing Ruizhi Aoheng Technology Co., Ltd
The intelligent industrial alignment detection camera is the latest research and development for PCB detection applied in mobile phones and tablets. Its performance: powerful built-in functions, accurate identification accuracy, fast. Its features: no PC host to save space and cost, unqualified alarm and prompt, multi-area detection and alignment, manual adjustment of the size of the area, automatic manual detection switching, can be connected to the trigger and indicator light, image adjustment, template storage and other functions. Super series of industrial cameras, Magic Eyes series of intelligent measurement cameras, Micro series of microscope cameras, Gigabit network series cameras, are intelligent image for different fields, independent research and development of independent production of heavyweight cameras, involving industry, military industry, medical care, banking, teaching, aerospace, transportation and other fields. 10 years of wisdom, excellence.
Shenzhen Vision Dragon Technology Co., Ltd
The VD300 Series 3D Height Difference Measurement System is designed to measure the height difference or coplanarity of objects in the harsh environment of the factory floor. Its simple and flexible design is based on laser triangulation, which reduces costs and maximizes profits by improving the effective testing of products, completely replacing imported products. The product is high precision, stable and reliable; No programming, easy configuration; Datum selection and tilt correction; Optical modules, laser safety grades, outer packaging, etc. can be customized to meet customer needs. VD300-3D height difference measurement system is suitable for the height measurement and detection of objects with the same geometric characteristics, such as electronic components, hardware, all kinds of precision connector size detection; Can measure difficult to detect color, material and complex shapes, character recognition; For objects with high precision and large size, multi-camera imaging can be used to meet the requirements of measurement accuracy.