From March 17 to 19, 2021, the China (Shanghai) Machine Vision Exhibition and machine vision technology and industrial application seminar hosted by the machine vision industry alliance (cmvu) and hosted by Munich Exhibition (Shanghai) Co., Ltd. was held as scheduled in Shanghai New International Expo Center. The exhibition was large-scale, with a total of 215 exhibitors participating in the event and a total of 79453 visitors.

In this exhibition, four flagship products of I-TEK photoelectric line carrying scanning camera, large-scale scanning camera, high-speed surface scanning camera and image acquisition card made a wonderful debut, which attracted many new and old customers, operators and peer enterprises to exchange and discuss cooperation. As a domestic pioneer of industrial imaging, eco first showed its edge at the exhibition with innovative products and high technology, and also took this opportunity to show the vitality and vitality of made in China to the world giants in the machine vision industry.

Ye Jiasheng, vice president of the company, accepted the on-site interview of visual system design magazine. In view of the rapid development and rise of China's machine vision market, President Ye focused on analyzing several key markets with outstanding growth, and gave targeted explanations on the company's new products in response to the development of key markets.

At the same time, President Ye also pointed out that risks and challenges coexist, and various challenges are hidden under the huge market demand with the continuous improvement of industrial automation. However, Echo microelectronic always adheres to innovation first, quality first, turning challenges into opportunities, and tries to light up the light of intelligent science and technology in China's manufacturing industry with a trickle down force.

At the exhibition site,I-TEK mainly displayed some flagship products.

PL4KCL-200KT Mono line scan camera
It adopts advanced global shutter CMOS image sensor with a resolution of 4096 * 2pixels and a pixel size of 7μm. Support camera link interface, with line frequency up to 200kHz. The camera has compact structure design (62 x 62 x 23.2mm) and has good cost performance advantages.

PL4K series color line scan camera
Advanced global shutter CMOS image sensor is adopted, with a resolution of 4096 * 2 pixels and a pixel size of 7μm. Support gage vision (30kHz with saccelTM) And camera link (66KHz). PL4K series cameras are compact in structure design (62 x 62 x 32.4mm) and have good cost performance advantages.

PL8KCL-50KX Multipoint exposure time-sharing line scanning camera
The combination of TDI and time-sharing exposure can support time-sharing exposure of four light sources and output four complete images at one time. The camera integrates advanced global shutter CMOS image sensor (resolution 8320x16 pixels, pixel size 5μm), large-scale field programmable logic gate array parallel processor, and outputs data through camera link bus. The line frequency is up to 50KHz. At the same time, it has the characteristics of high speed, high sensitivity and low noise, which improves the image quality and detection efficiency.

TS12MCXP-172M/C 12 megapixel industrial camera
Advanced global shutter CMOS image sensor is adopted, with a resolution of 4096 * 3072pixels and a pixel size of 5.5μm. Using coaxpress interface, the frame rate is up to 180fps at full resolution.

TTS151MCXP-6M/C 151 megapixel industrial camera
Advanced CMOS sensor with resolution of 14192 * 10640 pixels and pixel size of 3.76μm. Using coaxpress interface, the maximum frame rate is 6.2fps. The camera adopts electric cooling, which can meet higher imaging requirements and is suitable for the detection of various large-scale moving targets.

Vulcan-CXP6 Vulcan
Support 1-4-way coaxpress arbitrary topology connection, adopt PCIe gen3 x 4 interface, image acquisition speed up to 25Gbps, 1 - * / image buffer up to 8GB, power supply, control and trigger of coaxpress camera, support windows7 / 10 32 / 64bit and Linux operating system.

Next Station
October 28-30, 2021
Visionchina China Machine Vision Exhibition
I-TEK optoelectronics is waiting for you in Shenzhen!